In-Line Gauge Guard
Material:
CPVC, PP, PVDF,
Performance:
Sizes 1" to 4"
Features:
The In Line Gauge Guard Assembly is designed for use with SERFILCO pumps and SER-DUCTOR agitation systems to provide performance feedback for optimization of the pump operating point. Pumps which have too little system back-pressure operate far out on the pump curve where NPSH requirements are highest. This can lead to pump cavitation with corresponding premature wear and seal failure. Use of the In Line Gauge Guard Assembly along with a flow control valve allows the user to determine where on the curve the pump is operating and to control the pump output for best performance.
22 items of 1

ActionSkuPriceDescriptionMaterialMaterialSizeInletOutletPress.(max)
99-1242-1$362.0090° FlowCPVCEPDM1 1/2NPT60 psi
99-1244-PP$608.00PPEPDM3MNPT3NPT3NPT60 psi
99-1242-PPV$305.00PPFKM1 1/2NPT
99-1244-V$504.00CPVCFKM3MNPT
99-1244-1$472.00CPVCEPDM3SOC
99-1244-1V$504.00CPVCFKM3SOC1/4BSP1/4BSP60 psi
99-1244$575.00CPVCEPDM3MNPT
99-1243-KV$930.00PVDFFKM2MNPT
99-1243-V$433.00CPVCFKM2MNPT2NPT2NPT60 psi
99-1243-PP$425.00PPEPDM2MNPT60 psi
99-1243$374.00CPVCEPDM2MNPT60 psi
99-1242-KV$1,015.00PVDFFKM1 1/2MNPT1 1/2NPT1 1/2NPT60 psi
99-1242-V$365.00CPVCFKM1 1/2MNPT1 1/2NPT1 1/2NPT60 psi
99-1242-PP$299.00PPEPDM1 1/2MNPT1 1/2NPT1 1/2NPT60 psi
99-1242$362.00CPVCEPDM1 1/2MNPT1 1/2NPT1 1/2NPT60 psi
99-1241-V$366.00CPVCFKM1 1/4MNPT60 psi
99-1241-PP$337.00PPEPDM1 1/4MNPT1 1/4NPT1 1/4NPT60 psi
99-1241$337.00CPVCEPDM1 1/4MNPT1 1/4NPT1 1/4NPT60 psi
99-1240-KV$602.00PVDFFKM1MNPT
99-1240-V$350.00CPVCFKM1MNPT
99-1240-PP$319.00PPEPDM1MNPT1NPT1NPT60 psi
99-1240$319.00CPVCEPDM1MNPT1NPT1NPT60 psi
22 items Current Page1 of 1

Shopping Cart