Dry Run Pump Protector
Performance:
Pump Protectors
Features:
Cooling water service for double mechanical seal pumps and vertical pump bearings.
These flow activated models use a state-of-the-art PCB to monitor a minimum flow to stop the pump motor. They are adjustable for flow rates from 0.1 gpm to 6.0 gpm. These units are factory set for 0.1 gpm. If used for a multiple bearing sump pump, the unit must be reset to a higher set point per the pump's operating instructions. These models are plastic enclosed, include 8 feet of extension cable and mounting bracket for 56, 140 and 180 "C" face motor frames. Select a model for either factory or field installation. When used with magnetic H-O-A starter: In the AUTO position, the DRI-STOP will allow the motor to start if the seal/bearing water flow is 6 GPH or higher. The HAND position should not be wired into the control circuit. Note that a push button magnetic starter may be used instead of the recommended H-O-A. For motor starters, see Bulletin A-103. CAUTION !! In the AUTOMATIC mode, the motor will come on automatically when the water supply is turned on.
11 items of 1

ActionSkuPriceDescriptionMaterialMaterialSizeInletPress.(max)Electric Data
99-0376-1$372.22PRESSURE SWITCHSTPVC2<>6 PSI1/4NPT6115-230 VAC
99-1152-R$977.00Factory Installed '2R'PVDFFKM1/4NPT100115V/1/50-60
99-1152-RE$960.002REPVDFFKM1/4NPT100115V/1/50-60
99-0379-A$556.00Pressure SensingPVDFFKMType 31/2NPT8024-115-230 VAC
99-0377-A$472.003CCPVCFKM2<>6psi1/2NPT624-115-230/1/50-60
O-DS3K$868.00PVDFFKM1/2NPT8024-115-230/1/50-60
O-DS3C$521.00Pump Protector (Factory Installed)CPVCEPDM1/4NPT424-115/230/50//60
99-1116-R$1,003.332RPVDFFKM1/4NPT10024V 60//50Hz
99-1116-RM$824.00PVDFFKM1/4NPT10024V 60//50Hz
O-2DS2R$1,213.00Factory Installed Dri-StopPPCPVC1/4NPT10024V/1/50-60
99-1116-RE$1,010.00Field InstalledPVDFFKM2RE1/4NPT10024V/1/50-60
11 items Current Page1 of 1

Shopping Cart