Coalescing System
Application:
LIQUID / LIQUID SEPARATION
Material:
ST, PVC, PP
Performance:
300-1500 gph
Features:
  • Plastic prefilter chamber and coalesce with EPDM gaskets
  • Polypropylene air operated diaphragm pump with PTFE internals.
  • Air pressure regulator
  • Light and heavy phase discharge valves on coalescer
  • Corrosion resistan mounting plates
  • Pump will run dry and self primes to 10ft
Benefits:
COMPACT, ECONOMICAL LIQUID SEPARATION SYSTEMS FOR USE WITH NON-EMULSIFIED SOLUTIONS UP TO 150°F.
SERFILCO® Coalescing Systems are compact, economical, and simple to operate. Remove oils from rinse waters, cleaning solutions, plating solutions or waste effluents. Separate water or tramp oil from hydraulic fluids and machining coolants. Highly effective systems pump, prefilter and separate nonemulsified fluids having a .09 or greater difference in specific gravity. Solution is pumped through prefilter, then coalescing element where small droplets are held until large enough to float to top of coalescing chamber. Light phase is discharged from top of coalescing chamber, heavy phase is discharged from bottom of coalescing chamber. Unwanted phase is periodically bled off via manual flow control valve. Purified solution is directed back to tank or reservoir for re-use. Recovered effluent contains less than 10 ppm of the discontinuous phase. Carbon purification may be used to polish. Standard coalescing systems include pump,* prefilter and coalescing chamber with manual light and heavy phase discharge valves. Prefilter media of 5 to 10 micron is required to protect coalescing element. Selecting a system with greater prefilter capacity will reduce prefilter cartridge and coalescing element consumption. If properly protected, coalescing element has indefinite life. Coalescing of fluids with excessive particulate loading is best accomplished when solution is first clarified with separate filtration system. * Standard pumps are low shear positive displacement: flexible impeller, rotary gear or diaphragm. These pumps minimize emulsification in pump head and have self-priming capabilities. For removal of floating or light phase, pump suction must be connected to overflow weir or optional skimmer assembly. For removal of heavy phase solution, suction connection near tank bottom is recommended.
3 items of 1

ActionPriceSkuMaterialMaterialSizeInletOutletFlow(max)Press.(max)MediaPowerChamberCapacityTotal CapacityRPMElectric DataPhasePumpSeal Type
United States:
Toll Free: +1 (800) 323-5431
CallS-1277STNBR10"1NPT1NPT180 GPH100 psi5 x 10" Double Open End Filter Cartridge50.33 hpSeries 'M' Chamber0.33m217.5ft21725115/230/1/601Series 'T' Self-Priming Centrifugal PumpsSingle Mechanical Seal
United States:
Toll Free: +1 (800) 323-5431
CallS-1278STEPDM1/2NPT1/2NPT300 GPH50 psi5 x 20" Double Open End Filter Cartridge50.5 hpSeries 'M' Chamber0.65m235ft21725115/230/1/60Series 'T' Self-Priming Centrifugal PumpsSingle Mechanical Seal
United States:
Toll Free: +1 (800) 323-5431
CallS-1279STNBR30"1NPT1NPT540 GPH35 psi5 x 30" Double Open End Filter Cartridge51 hpSeries 'M' Chamber0.98m252.5ft21725
115/230/1/60 TEFC, 1115/230/1/60 TEFC, 1725 RPM
1Series 'T' Self-Priming Centrifugal PumpsSingle Mechanical Seal
3 items Current Page1 of 1

Product Bulletin
Shopping Cart